You may have the trouble like: The keystone jack was broken but the repair cost is too high to call a repairment. Then you want to change the keystone jack by yourself, but having no professional tools so that don't know how to start the beginning....
Hey! Here comes the best solution now!
Today, we are going to teach you about the installion of toolless keystone jack which helps you save the money and time. There're only two tools that you need are the scissors and utility knife.You can only use these simple tools to install keystone jacks without any professional tools!
Prepare your scissors and utility knife, we're going to start the teaching installing keystone jack of DIY!
First, strip the cable jacket with utility knife lightly about 2~3 centimeters in case you hurt the cores
If you're using Cat. 6 cables, there's the cross separator in the middle of the cable
You can cut the cross separator off with scissors after stripping the cable jacket
Then, put the cores into the groove on the cable cover
You can see the image of cable arrangement which we've already pointed out on the cable cover
After that, cut the extra wires with your scissors like the image shown
Remember, choosing pure copper ethernet cables which is with high quality is a very important thing
It not only impacts your ethernet transmission but also hurts your tools
According to those we've mentioned, we recommend you purchase the ethernet cables with great performance like LINKOMM
The last step!
Buckle up the keystone jack with the cover which designed with a feature of fool-proofing
Now we finished the DIY with keystone jack!
You better test the cable whether it works or not before snapping into the faceplate or surface mount box
Don't worry you made a mistake,this kind of LINKOMM ketsotne jack is designed for re-use
